Designed to hold twelve 209 primers. Easy to use, just squeeze lanyard loop to remove from body, load primers, and replace lanyard loop. Can be used on most in-line muzzleloaders.

1. Holds 12, 209 primers in body of capper and one in loading positions

2. Brass construction

3. For use in most muzzleloaders utilizing 209 primers

4. Works in scoped muzzleloaders

Instructions For Use:

• Squeeze the lanyard loop on end of capper and pull arms out of holes

• Load the 209 primers with the flat side down into the capper.

• When full, replace the lanyard loop.

To Load A Primer:

• Place your thumb on first primer to line and gently push forward to load the primer into the loading gate.

• Place capper into receiver area and push the loaded primer into the 209 nipple. When primer is inside of nipple, pull capper out and away leaving the primer inside the nipple.

Caution: Percussion caps and primers can explode and cause injury or damage if subjected to high heat, open flames, static electricity, or excessive finger pressure. Always wear proper eye and ear protection when using or handling percussion caps.

Item #: A1418