Your Traditions 209 In-Line Shooters kit contains the necessary items to begin your muzzleloading experience. You also will have to purchase the 209 shotgun primers and pelletized powder to actually begin to shoot. There are many more muzzle loading accessories that can be helpful when shooting and loading which are not included in this package.

For In-Line and Break-Opens .50 Caliber

Includes:
• 209 Capper
• Bullet starter
• Magnum Quick Loaders
• Bronze cleaning brush (10/32 thread)
• Cleaning/loading jag (10/32 thread)

For .50 cal In-Line and Break-Opens
 

Instructions:

209 Capper/Decapper

1. Squeeze lanyard loop to free arms from brass body.
2. Load 209 primers into brass body with lip of primer down.
3. Replace lanyard loop.
4. Move one 209 primer into front loading area.
5. Push the 209 primer into the nipple and then pull capper away, leaving the primer inside the nipple.

Magnum Quick Loaders

1. Fill one side with bullets and the other side with loose or pelletized powder. Load up to 150 grains only.

Round Handle Ball Starter

1. Center projectile over muzzle.
2. Place short starter over projectile.
3. Press or tap starter handle with hand to start the projectile into the barrel.
4. Place long starter rod over projectile and press deeper into barrel.
5. Using ramrod, be sure to firmly seat the projectile onto the powder charge.

.50 Caliber Cleaning Brush- Bronze

1. Screw onto end of ramrod
2. Scrub inside of barrel with brush and cleaning solvent or hot, soapy water.
3. Repeat as necessary.

.50 Caliber Loading/Cleaning Jag

1. Screw onto end of ramrod.
2. Use to load projectile after started with Ball Starter.
3. Use with cleaning patches to wipe inside of bore.